XC709D 6-Axis CNC Numerical Control System for Carving Milling Drilling & Tapping. XC709D multi-function numerical control system is perfect for engraving, milling, drilling, and tapping.
With 32-bit high-performance microprocessor, it features real-time multi-task control technology. It is designed with hardware interpolation technology, full linkage, and high-speed algorithm for small lines. Its interpolation accuracy is accurate as 0.001mm, and its speed up to 30 m/min. It is the best choice for your engraving machine, small processing center, CNC milling machine and CNC drilling machine.
Based on 32-bit microprocessor, it supports full linkage, 0.001 mm interpolation accuracy, and direction + pulse and orthogonal pulse. 7-Inch Color LCD: 800 x 480 resolution. Equipped with 8 softkeys, it is easy to learn and operate. It offers rich display interfaces for parameter classification, alarm log, system diagnosis and the like.
It facilitates debugging and maintenance. Using international standard G instruction which is compatible with FANUC system instruction. 40 kinds of G command codes support drilling and tapping cycles. Full screen editing of program for your parts. Built in 1G memory for storing N pieces of parts programs.
USB Interface: Support reading and writing, data backup for U disk file. I/O 24/24: It is flexible to use, for its I/O ports can be expanded to 96/96. Two Languages: Chinese and English operation interface for convenient operation. The system adopts acceleration and deceleration control before interpolation.Support length and cutter radius compensation. Support processing via external pendant handwheel.
Supports multi-level operation authorization for easy management, featuring time-limited system locking function. Supports for G code files of third-party software, including UG, Mastercam, PowerMill, Feature CAM, ArtCAM, JDPaint, Wentai. Flexible to use a variety of tool magazines, supporting self-programming tool magazine.Basic functions: - Number of Controlled Axes: 6-Axis - Number of Linkage Axes: Full Linkage - Tool Magazine: Support; Need to edit the code of tool magazine - Spindle: 2-way analog spindle, in which spindle 1 can be digital spindle (occupying a digital spindle) - Spindle Monitoring: Yes - Minimum Instruction Unit: 0.001 mm - Maximum Instruction Value: ±99999999 x mini- Fast Feed Speed: 30,000mm/min - Rate of Feed: F0, 25%, 50%, 75%, 100% - Pulse Modes: Mode 1: Direction + Pulse; Mode 2: Orthogonal Pulse (Recommended, featuring anti-jamming if your driver supports) - Maximum Frequency: Settable in 100Khz, 200Khz, 500KHz. (500KHz can only be achieved in orthogonal output modes of all axes) - Feed Rate Multiplier: 0-150% - Electronic Gear Ratio: 1-65535:1-65535 - Automatic Acceleration & Deceleration: Yes - Advanced Algorithm for Small Lines at High Speed: Yes - Compatible with Handwheel: Yes - Location: G00 (Linear Interpolation Location) - Interpolation: Linear (G01), Circular (G02/G03/G12), Spiral-line Interpolation - Returning to Reference Point: Automatically (G28) - LCD: 7-inch TFT LCD screen with resolution of 800 x 480 - MDI Softkey: 8 - Step Feed Amount: x1, x10, x100 - Communications Interface: U disk interface - External Handwheel Interface: Yes - I/O Interface: 24/24 (Extensible to 96/96) - Pause (seconds): Yes - Accurate Stop Status: Yes - Accurate Stop: Yes - Storage Travel Checking: Yes - MDI Running: Yes. It supports multi-segment operation - Reset: Yes - Jump Switch: Yes - Single Block Operation: Yes - Program Protection Switch: Yes - Self-diagnostic Function: Yes - Emergency Stop: Yes - Power Supply: Single-phase AC220V+10%-15%, 50Hz±1Hz - Coordinate Systems: Machine Coordinate System (G53), Workpiece Coordinate System (G92, G54-G59), Local Coordinate System (G52), Plane Designation of Coordinate System - Automatic Coordinate System Setting: Yes - Decimal Point Input: Yes Auxiliary Function: - Auxiliary functions: M2 digits, M code customization, manual/MDI/automatic control of spindle forward, reverse and stop; control of coolant to start and stop; control of lubrication to start and stop, etc. Spindle Functions: - Spindle Function: Dual Spindles - Digital Spindle: Spindle 1 supports digital spindle, occupying a digital axis (Z axis does not support), featuring stable speed - Tapping: Support - Spindle Analog Output: Yes. Dual-spindle output Tool Functions: - Tool function: Support automatic tool change, support split-centered tool, three-point centered tool alignment - Tool Compensation Memory: - 9999.999 to 9999.999, 99psc - Tool Compensation: Tool Length Compensation & Cutter Radius Compensation Editing Operation: - Editorial Functions: Parameters, Diagnostic Bit Input, Program Editing, MDI Multi-segment Execution - Storage Capacity: 1G - Number of Stored Programs: 500pcs - Display of Program Names: Chinese, English, Numbers, and Combinations - Looking for Program Lines: Yes - Skip Optional Program Segment: Yes - Program Switch: Yes Display: - Displayed Language: Chinese, English - Processing Time & Number of Parts: Display - Spindle Speed, M/S Instruction: Yes. 1 x XC709D 6-Axis CNC Numerical Control System. Usually it cost about 35USD-50USD. The item "XC709D 6-Axis CNC Numerical Control System for Carving Milling Drilling&Tapping" is in sale since Wednesday, June 19, 2019.
This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines". The seller is "thanksbuyer-hobby" and is located in ShenZhen. This item can be shipped worldwide.